Axim X-108NX Manual de usuario descargar pdf (Pagina 86)

2. Configure [Mode Switch] Settings based on the instructions listed below

Mode

Select the operation mode as Router mode or NAS mode.

After you saving the settings, the router will reboot and enter the

working mode which you have selected.

3. Configure [Administration Interface] Settings based on the instructions listed below.

Language

Select the language of administration Interface you wish to use.

Administrator Password

Maximum input is 36 alphanumeric characters (case sensitive)

* Please change the administrator‟s password if the remote

management is enabled. Otherwise, a malicious user can access

the management interface. This user can then have the ability to

change the settings and damage your network access.

Re-type Password

Enter the password again to confirm.

Remote Management

Select Enable to enable Remote Management.

Select Disable to disable Remote Management

If the remote management is enabled, users who are not in the

LAN can connect to AXIMCom X-Router and configure it from the

Internet.

Management Port

HTTP port which users can connect to. (default port is 8080)

4. Configure [Configuration] Settings based on the instructions listed below

Configuration Export

Click Export to save your current configuration settings in a file.

Default Configuration

Restore

Click Restore to recover the default system settings.

Configuration Import

Click Browse and Import to load previous configuration settings.

5. Configure [Firmware] Settings based on the instructions listed below

Firmware Upgrade

Click Browse and Upgrade to upgrade the firmware.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 92 93 94

Sin comentarios

Axim X-108NX Manual de usuario Pagina 86